BATT OTOS
District heating substation
production of discontinued
calculation and selection
89 % - model rating
Опросный лист для подбора ИТП
Model
BATT
Manufacturer
Country
Ukraine
Allowable working fluids
Water
T1max - maximum temperature of the heat carrier at the input of the DHS from the heat source
130 °C
T11max - maximum temperature of the heat transfer at the entrance to the heating system
100 °C
PN1 - nominal pressure in the heat source circuit
1.6 MPa
PN11 - nominal pressure in the heating system circuit
1.0 MPa
dP1 - pressure difference at the inlet from the heat source
от 45 - до 500 kPa
dP11max - maximum pressure drop in the heating system at the calculated flow rate
до 30 kPa
U - power supply voltage
~380/220 V
technical
specifications
price
| model | Heating load kWt |
G1 (HN) m³/h |
G11 (HS) m³/h |
N kWt |
m kg |
price |
|---|---|---|---|---|---|---|
| BATT-100 | 50-100 | 2.0-5.0 | 2.0-6.0 | 0.40 | 80-150 | production of discontinued |
| BATT-200 | 100-200 | 4.0-10 | 4.0-12 | 1.0 | 230-320 | production of discontinued |
| BATT-300 | 200-300 | 8.0-20 | 8.0-24 | 1.7 | 250-420 | production of discontinued |
| BATT-500 | 300-500 | 10-25 | 10-30 | 2.4 | 300-550 | production of discontinued |
Heating load [kW] - range of heat load for the heating system compatible with this District heating substation (DHS).
G1 [m³/h] - range of volumetric flow rate of the heat transfer fluid from the district heating network (in the source circuit).
G11 [m³/h] - range of volumetric flow rate of the heat transfer fluid circulating in the heating system.
N [kW] - nominal electrical power consumption in operating mode.
m - mass of the district heating substation, kg.
question : comment : feedback
Catalog of add your product to the catalog
discontinued
BATT
OTOS
OTOS
