calculation and selection
Технічний опис
buy a WATT SO-ZS OTOS in United States
No supplier OTOS from United States is registered in our catalog |
||
| [0] priority |
add company |
|
Model
WATT SO-ZS
Manufacturer
Country
Ukraine
Allowable working fluids
Water
T1max - maximum temperature of the heat carrier at the input of the DHS from the heat source
150 °C
T11max - maximum temperature of the heat transfer at the entrance to the heating system
90 °C
PN1 - nominal pressure in the heat source circuit
16 MPa
PN11 - nominal pressure in the heating system circuit
10 MPa
dP1 - pressure difference at the inlet from the heat source
от 7 - до 40 kPa
dP11max - maximum pressure drop in the heating system at the calculated flow rate
до 0.70 kPa
U - power supply voltage
230 V
technical
specifications
price
| model | Heating load kWt |
G1 (HN) m³/h |
G11 (HS) m³/h |
N kWt |
m kg |
price |
|---|---|---|---|---|---|---|
| WATT SO-ZS 100 | 50-100 | 1.1-2.3 | 2.2-4.5 | 0.40 | 250 | add your price |
| WATT SO-ZS 200 | 100-200 | 2.3-4.5 | 4.5-8.9 | 0.60 | 400 | add your price |
| WATT SO-ZS 300 | 200-300 | 4.5-6.8 | 8.9-13.4 | 1.3 | 500 | add your price |
| WATT SO-ZS 500 | 300-500 | 6.8-11.3 | 13.4-22.3 | 1.5 | 600 | add your price |
Heating load [kW] - range of heat load for the heating system compatible with this District heating substation (DHS).
G1 [m³/h] - range of volumetric flow rate of the heat transfer fluid from the district heating network (in the source circuit).
G11 [m³/h] - range of volumetric flow rate of the heat transfer fluid circulating in the heating system.
N [kW] - nominal electrical power consumption in operating mode.
m - mass of the district heating substation, kg.
question : comment : feedback
Catalog of add your product to the catalog
discontinued
BATT
OTOS
OTOS
