Installation of pressure regulators

The guarantee of long-term and trouble-free operation of pressure regulators is installation in accordance with the installation instructions. In addition, the following recommendations should be taken into account:

• A strainer should be installed before the pressure regulator in the direction of water flow.
• Manometers must be installed before and after the pressure regulator to adjust and monitor its operation.
• On critical sections where pressure exceeding the setting pressure is unacceptable, a safety valve must be installed before the pressure relief controller.
• The installation position of pressure regulators can be horizontal, vertical, or inclined on a pipeline, unless otherwise stated in the installation instructions.
• The valve body should not be subjected to twisting, stretching, bending, or compression loads from attached pipelines.
• Misalignment of attached pipelines is not allowed.

question : comment : feedback

We do not sell equipment. Our goal is to help calculate and select the appropriate equipment. Companies can register on this website, add their equipment, and specify its price.